RDS Pole System
Available across selected height ranges including 12m, 15m, 18m and 24m, depending on load category and operator requirement.
Send an Enquiry Rapid Deployment System, RDS
Faster, cleaner and more flexible deployment for urgent telco infrastructure needs.
Designed for Speed, Flexibility and Practical Site Deployment
Jitrapadu’s Rapid Deployment System, RDS, is designed to help clients deploy telecommunication structures with less site complexity and shorter setup time. Instead of relying only on conventional cast-in-place concrete foundations, RDS uses a steel-base foundation with interlocking precast concrete blocks.
This system is suitable for tight timelines, constrained locations, temporary coverage needs and sites where future relocation may be required. It is one of Jitrapadu’s key innovations and has been recognised as a practical solution for faster telco infrastructure deployment.
Product Range
RDS Base Foundation
Steel-base foundation with interlocking concrete blocks, designed to reduce reliance on conventional cast-in-place foundation works.
RDS for Single-Sharer Sites
Suitable for selected light-duty deployments where one operator is required.
RDS for Double-Sharer Sites
Medium-duty options can support selected two-operator deployment needs.
RDS for Triple-Sharer Sites
Selected 24m medium-duty configurations can be designed for higher sharing capacity.
RDS-Compatible Tower Structures
RDS footing solutions can be adapted for selected tower structures, including light-duty tower deployments.
Our Steps
Installation &
Deployment Workflow
Step 1:
Site and Timeline Assessment
We review the location, space constraints, required coverage, number of operators and urgency of deployment.
Step 2:
Structure and Base Selection
The right pole height, load-bearing category, base size and foundation configuration are selected based on project requirements.
Step 3:
Engineering Confirmation
Our engineering team checks the structural design, load requirements and foundation suitability before fabrication begins.
Step 4:
Fabrication of Steel Components
Pole sections and base components are fabricated at our in-house factory to match the approved configuration.
Step 5:
Preparation of Interlocking Concrete Blocks
Precast concrete blocks are prepared for the RDS base system, reducing the need for conventional wet works on site.
Step 6:
Site Preparation
The deployment area is prepared with the required platform, access and positioning for the RDS base.
Step 7:
Base Assembly
The steel-base foundation and interlocking concrete blocks are assembled according to the approved layout.
Step 8:
Pole or Tower Erection
The structure is installed section by section, with alignment and safety checks carried out during erection.
Step 9:
Equipment Installation Support
Telco equipment, cabinet components and related accessories are installed according to the site requirement.
Step 10:
Testing, Handover and Future Relocation Support
After final inspection and handover, the structure can be maintained or relocated if the project requires future redeployment.
Applications & Use Cases
RDS is suitable for clients who need reliable telecommunication infrastructure with faster setup, flexible foundation options and reduced site disruption.
Rapid telco site deployment
Temporary or semi-permanent coverage
Urgent network expansion
Sites with limited space or setback
Event or congestion coverage support
Rural and remote connectivity deployment
Projects with tight timeline or budget constraints
Relocatable telecommunication infrastructure
Featured Projects
See selected RDS projects that demonstrate faster deployment, practical foundation design and flexible telco infrastructure setup.
24m 2 telco-sharer with RDS base
Kajang, Selangor
45m 4-legged light-duty tower with RDS base
Changkat Jong, Perak
24m Portable Base
Paka, Terengganu
FAQ
Your Questions, Answered
RDS is a telecommunication structure solution that uses a steel-base foundation with interlocking precast concrete blocks to support faster and more flexible deployment.
Need Faster Telco Deployment?
Share your site requirements with us and we will help you assess whether RDS is the right solution for your timeline, space and load requirements.
Send an Enquiry
Engineering Excellence,
Powering Innovation
Contacts
Lot 810 & 811,
Batu 3 ½ Jalan Kapar,
42100 Klang,
Selangor Darul Ehsan,
Malaysia
03-3343 5663
